How to reduce the adverse effects of liquid flow in sanitary ball valves used for liquid filling

How the sanitary ball valve used for liquid filling can reduce the adverse effects of liquid flow The technical parameters of sanitary ball valve products are introduced as follows: 1. Raw materials: 304 and 316L two commonly used materials, the product and the medium contact part 304 or 316L 2. Seal Parts: have strong acid, alkali and high temperature resistance, permanent compression deformation, small three. Connection: welded quick-loading screw type. 4. Quality: inside and outside the product is treated with high-end polishing equipment to meet the surface precision requirements. 4. Precision: Strictly follow 3A, DIN, SMS, BS and other product tolerance standards are implemented. 5. Working pressure: 1.0Mpa 6. Working temperature: -10℃+150℃ Medium: liquid, gas, oil, various highly corrosive chemical mediums. Sanitary ball valve used for liquid filling. It includes a drive mechanism, a sliding shaft, a valve body, a liquid inlet pipe, and an annular diaphragm. The drive mechanism of the product is fixed on the valve body. The valve body of the product has an inner cavity, the bottom end of the valve body has a liquid outlet, the top of the valve body has a slidable hole, the slidable hole and the liquid outlet are respectively connected to the inner cavity; The liquid inlet pipe of the product is installed on the side wall of the valve body, and the liquid inlet pipe is connected to the inner cavity; the top end of the slidable shaft of the product is connected to the drive mechanism, and the bottom end of the slidable shaft extends through the slidable hole of the valve body into the inner cavity, and The bottom end of the slidable shaft is located above the liquid outlet; the outer edge of the product's ring-shaped diaphragm is fixed on the top of the inner cavity, and the inner edge of the product's ring-shaped diaphragm is fixed on the slidable shaft. Due to the improvement of the structure of the diaphragm valve, this product uses the bottom end of the slidable shaft to block the liquid outlet, so the diaphragm can withstand greater pressure and can effectively reduce the adverse effect of the diaphragm on the flow of liquid.