E-mail : jessica@mayer.cn

How to recycle hygienic size heads

by:Mayer     2021-08-16
How to recycle the sanitary size heads? Material: 304, 316L, 321, etc. Structural features: The sanitary size heads are made of carbon steel, which is expressed by multiplying the diameter of the large head by the diameter of the small head and the thickness. Standard of sanitary size head: National standard, American standard, British standard and various non-standard high-pressure stamping. In addition to the use of steel pipe as the raw material for the production of small and Production. The shape of the punch used for drawing refers to the size of the inner surface of the small and Diameter multiplied by thickness.... The sanitary size head includes a tube body. The inner wall surface of the tube of the product is provided with a metal mesh that matches the shape and size of the inner wall of the tube. The metal mesh of the product is provided with a plurality of protruding points, and The two ends of the metal mesh are fixedly connected with the two ends of the pipe body. The metal mesh of the product is coated with an anti-rust layer, and the anti-rust layer of the product is made of anti-rust material. The stainless steel eccentric size head is fixedly installed on the inner wall surface of the pipe with a metal mesh with a convex tip. When the water containing impurities passes through the stainless steel eccentric size head, the convex tip of the metal mesh intercepts the impurities and forms larger particles of debris deposits. On the metal mesh, it will not be attached to the inner wall of the pipe. It is only necessary to periodically remove the metal mesh from the stainless steel eccentric size head for cleaning, and then install the cleaned metal mesh into the stainless steel eccentric size head, which can be recycled. . In addition to the use of steel pipes as raw materials for the production of stainless steel eccentric size heads, some specifications of sanitary size heads can also be produced by stamping and forming process using steel plates. The shape of the punch used for drawing refers to the design of the inner surface of the size head, and the die is used to After blanking, the steel plate is stamped and stretched.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...