What is the stainless steel threaded flange and what is the function of the stainless steel threaded pipe?

The stainless steel threaded flange and the pipe wall are connected by threads, and the additional pressure on the pipe wall is small. It is one of the widely used flange structure forms in engineering construction. It has the advantages of convenient on-site installation and no need for welding. The sealing surface type has raised surface and flat surface. 1. Type: flat welding flange with neck SO, flat welding flange with neck PL, butt welding flange with neck, WN threaded flange TH, socket welding flange SW, integral flange IF, blind flange BL. 2. Specification: DNu003d10～1000 PNu003d6.0～40MPa. 3. Material: 304, 304L, 316, 316L, 904L, 2520, and other stainless steel materials. 4. Standards: DIN, JIS, GB, ASTM/ASME. Flanges are the interconnecting parts between pipes and pipes and are used for connection between pipe ends; flanges are also used at the inlet and outlet of equipment for the connection between two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges, gaskets and bolts are connected to each other as a set of combined sealing structures. Pipe flange refers to the flange used for piping in the pipeline installation, and refers to the inlet and outlet flanges of the equipment when used on the equipment. There are holes on the flanges, and bolts make the two flanges tightly connected. The flanges are sealed with gaskets. The flange is divided into threaded connection (threaded connection) flange, welding flange and clamp flange. Flanges are used in pairs, wire flanges can be used for low-pressure pipes, and welded flanges for pressures of more than four kilograms. A gasket is added between the two flanges and then tightened with bolts. The thickness of flanges with different pressures is different, and the bolts they use are also different. Stainless steel pipes are safe, reliable, hygienic, environmentally friendly, economical and applicable. The thin-walled pipes and the successful development of new reliable, simple and convenient connection methods give it more irreplaceable advantages of other pipes, and more and more applications in engineering , The use will become more and more popular, and the prospects are promising. People are paying more and more attention to water quality issues in particular, and the requirements are constantly increasing. Due to its corrosiveness, galvanized steel pipe, a common pipe material, will gradually withdraw from the stage of history under the influence of relevant national policies. Plastic pipes, composite pipes and copper pipes have become common pipe materials for piping systems. However, in many cases, stainless steel pipes are more advantageous, especially thin-walled stainless steel pipes with a wall thickness of only 0.6 to 1.2 mm in high-quality drinking water systems, hot water systems, and water supply systems that put safety and hygiene in the first place. The system has the characteristics of safety, reliability, sanitation and environmental protection, and economical application.