Stainless steel elbows need to be checked regularly after installation

When installing the stainless steel elbow, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and the installation is carried out according to the used position. Under normal circumstances, it can be installed at any position in the pipeline, but it requires easy-to-operate inspection. Note that the medium flow direction of the cut-off stainless steel elbow should be upwards under the vertical valve disc. The stainless steel elbow can only be installed horizontally. When installing stainless steel elbows, pay attention to the tightness to prevent leakage and affect the normal operation of the pipeline. Stainless steel elbows need to be inspected regularly for a period of time. The exposed processing surface must be kept clean, cleaned of dirt, and stored neatly in a ventilated and dry place indoors. It is strictly forbidden to stack or store it in the open air. Always keep the stainless steel elbow dry and ventilated, keep the device clean and tidy, and store it in accordance with the accurate storage method. Stainless steel elbow processing relies on the power of conventional or special stamping devices, so that the sheet metal can directly bear the deformation force and deform in the mold, so as to obtain the production skills of commodity parts with a certain shape, size and function. Sheet materials, molds and their devices are the three elements of stamping processing. Because the stainless steel elbow pipe has the advantages of inner wall lubrication, small heat resistance, acid and alkali resistance, long service life, and convenient installation. The bolts of the stainless steel elbow valve packing gland should be tightened evenly, and should not be pressed into a crooked state, so as to avoid bruising, hindering the movement of the valve stem or causing leakage.